Connect

Connecting to BaselineRTK

Everything your rover needs, on one page: the server details, where to find each rover's username and password, what you will see in the mountpoint list, and which one to choose.

Your rover's settings

Four settings, and you're on corrections

Every rover and machine-control display asks for the same things, though the names vary. Enter these in its NTRIP or internet corrections settings.

Serveralso called Caster, Host or Address
ntrip.baselinertk.com
Port
2101
Mountpointalso called Stream
NEAREST_20 or NEAREST_94or one base by name: see below
Username and password
Your rover's loginshown in your account at app.baselinertk.com, one for each rover
Send positionalso called Send GGA or Send NMEA
On
NEAREST_20 / NEAREST_94

Nearest base, automatically

We send corrections from the base station closest to your rover, and move you to a closer one as you travel between sites. Your rover must send its position for this to work.

_20 or _94

Pick the datum

_20 sends GDA2020 and _94 sends GDA94. Use the one your design and site control are in: the two sit about 1.5 metres apart. For AHD heights, pair GDA2020 with AUSGeoid2020, and GDA94 with AUSGeoid09.

Ballarat_20

Or one base by name

Choose a base station by name to stay on it wherever you go. Your rover does not need to send its position. Once it has connected, its list shows the bases within 30 km, and any other base works if you type its name.

VIRTUAL_20 / VIRTUAL_94
Coming soon · December

Virtual Base, generated from your rover's position

For when you are not near a base. We build a base station from the base stations around you, so your base is right where you are working.

  • Turn on send position, the same setting as NEAREST.
  • VIRTUAL_20 sends GDA2020 and VIRTUAL_94 sends GDA94.
  • Same server, port and login as every other mountpoint.

Connected but no fix? Check these first.

  1. Check data is flowing. Look in the rover's modem or connection settings. You should see data being received, and a connection latency under 1 second.
  2. No data, or latency over a second? It is usually the modem or the mobile signal. Isolate the machine, wait a moment, then start it again.
  3. Check your login details. Server ntrip.baselinertk.com, port 2101, and the rover's own username and password from your account. The username and password are case sensitive.
  4. Still struggling? Email support@baselinertk.com with the rover's username and the mountpoint, and we will look at the connection from our end.

Connected but no fix? Check that send position is on, and that the mountpoint's datum matches your job. Still stuck? Email support@baselinertk.com and we will look at your connection from our end.

Username and password

Where to find your rover logins

Every rover has its own login. They are in your account, not in an email.

  1. Sign in at app.baselinertk.com.
  2. Your rovers lists each rover's username, for example brtk0001-01.
  3. A new rover's password, or one you have reset, waits under New passwords. Press Show new passwords to see it. It is shown once, so have the rover to hand.
  4. Lost a password? Press Reset password beside the rover. A new one appears under New passwords, and the old one no longer works for a new connection.

One login is for one machine at a time. Need another machine connected? Add a rover in Manage billing, and its login appears in your account within a minute or so.

The mountpoint list

What your rover will show

A new rover's mountpoint list shows only the NEAREST and VIRTUAL mountpoints. Once the rover has connected, the list also shows the base stations within 30 km of where it last connected, each twice, once for each datum: the base's name with underscores for spaces, then _20 for GDA2020 or _94 for GDA94. A base that is not in the list still works if you type its name, for example Ballarat_20. If the list ever shows only NEAREST and VIRTUAL again, after a password reset for example, connect once and ask again. Every base station we serve, live:

NEAREST_20
The nearest base, chosen for you, in GDA2020
NEAREST_94
The nearest base, chosen for you, in GDA94
VIRTUAL_20
A base generated from your rover's position, in GDA2020 Coming soon
VIRTUAL_94
A base generated from your rover's position, in GDA94 Coming soon
Loading base stations…

    See where each base is on the coverage map.

    Which one to use

    Pick by how you work

    Your machine moves between sites, or you are not sure which base is closest
    Use NEAREST_20 or NEAREST_94, with send position turned on.
    Your rover or display cannot send its position
    Use the closest base by name, for example Ballarat_20. Check the coverage map for the closest one.
    Your site was calibrated against one base, or the job must stay on a single fixed base
    Use that base by name for the whole job, so the reference never changes under you.
    Your design and site control are in GDA2020
    Use a mountpoint ending _20. For AHD heights, use AUSGeoid2020.
    Your design and site control are in GDA94
    Use a mountpoint ending _94. For AHD heights, use AUSGeoid09.
    You are not sure of the datum
    Ask whoever supplied the design before you start. The two datums sit about 1.5 metres apart.

    Whenever you change mountpoint, or your rover moves to a different base, check a known survey mark before you carry on. Stuck? Email support@baselinertk.com and we will look at your connection from our end.